7500 ION

7500 ION Power MeterHigh Visibility Energy and Power Quality Meter

Used at key distribution points and sensitive loads, the 7500 ION offers unmatched value, functionality, and ease of use.

The 7500 ION features a large graphical display, high accuracy measurements, 1/2 cycle setpoint response, power quality analysis, energy and demand tracking, historical trending, communications protocol support, web compatibility and control capabilities.

The 7500 ION comes with an extensive selection of pre-configured data screens and measurements so you can use them right out of the box, or customize either meter to fit your unique requirements.

Integrate the meter with our PEGASYS® software or other energy management and SCADA systems through multiple communication channels and protocols.

 

Applications Summary

Disturbance Analysis
Unique dynamic-ranging inputs maintain revenue accuracy at the regular measurement range while simultaneously capturing large-scale disturbances other meters can miss. Discover the sources of power quality events, harmonics, and voltage sags/swells. Analyze problems and avoid repeat interruptions.

Cost Allocation & Billing
Determine cost centers, identify demand control opportunities and check energy consumption patterns.

Demand & Power Factor Control
Avoid penalties with automated load shedding, scheduling, peak shaving or capacitor bank control.

Load Studies & Circuit Optimization
Determine the capacity of your electric network and run at peak efficiency. Perform load trending.

Equipment Monitoring & Control
Improve process yields and extend equipment life. Meter utilities including gas, steam and water.

Preventative Maintenance
Set up alarms to warn of pending problems. Log events and alarms for all critical conditions.


 

Features Summary

Measurements

  • Exceeds Class 0.2 revenue accuracy
  • Instantaneous 3-phase voltage, current, frequency, power factor
  • Energy: bi-directional, absolute, net, time-of-use, loss compensation
  • Demand: sliding window, predicted, thermal
  • Harmonics: individual & total harmonic distortion up to the 63rd
  • Sag/swell recording
  • Clamp-on CT option

Communications

  • Web server, Meter M@il® allow distribution of metered data and alarms over the Internet
  • Optional built-in modem with ModemGate™ to allow modem access for 31 other devices
  • 10Base-T or 10Base-FL Ethernet port option with EtherGate™ for direct data transfer from Ethernet to as many as 31 RS-485 devices
  • Two RS-485 ports, one switchable to RS-232
  • One front panel optical port
  • Modbus™ RTU and DNP 3.0 protocol support

On-Board Data Logging

  • Scheduled or event-driven logging for hundreds of parameters
  • Sequence-of-events & min/max logging

Setpoints for Control and Alarms

  • Setpoint on any parameter or condition
  • 1 second or ½ cycle operation

Inputs and Outputs

  • 8 digital inputs for status/counter functions
  • 7 relay outputs for control/pulse functions
  • Optional analog inputs and outputs